Jaw & Jaw Turnbuckle Galvanized Drop Forged Steel Din 1480

US Type Drop Forged Jaw And Jaw Turnbuckle feature a jaw fitting on opposite ends to connect ropes or rods.

Jaw Jaw turnbuckles are drop forged, quenched and tempered(Q&T), made from high tensile carbon steel(C1045), load test is 2.5 times the Working Load Limit. Breaking Load is 5 times the Working Load Limit. Meets or exceeds the performance requirements of ASTM F-1145 (formerly Federal Specification FF-791B) and ASME B30.26.

US type drop forged jaw and jaw turnbuckle aka rod clevis turnbuckle, is far more practical due to with safety latch: either a nut, bolt, pin or cotter pin, you can attach the wire rope sling straight onto the jaw end and pinned to the lifting lug very quickly but more safety than hook and hook turnbuckle.

Drop forged, quenched and tempered(Q&T), commonly we call Q&T as heat-treated utilizing, making the carbon steel material tougher that ensures reliable performance in critical applications, read this article: The Complete Guide You Should Know About Turnbuckle Hardware

HS Code: 732690

Shipping and Payment Term:

• We generally ship cargos worldwide by sea. The goods will be in a shipping container when arriving at the port. You are responsible for picking up your shipment and customs clearance on your side.

• We do accept small, urgent orders that need to be shipped by air.

• We currently accept T/T & L/C.

• Please contact us if you have any questions about shipping or payment, we will be happy to assist you.

US type galvanized turnbuckle jaw threads diameter x take up(inch):from 1/4″x 4″to 2-3/4″ x 24″ with the capacity is from 500 lbs to 75000 lbs